How To's

How To Make A Star Cushion

How To Make A Star Cushion

 

Everyone loves cushions right? I mean what’s not to like? In much the way that pearl earrings compliment the little black dress and complete the outfit. The finishing touch to interiors just has to be cushions. They can change the feel of a room in seconds! And utterly transform an interior from cold and clinical to warm and cosy. They add depth and texture. And they’re one of the most versatile interior accessories out there. But boy can they cost the earth! Especially Star Cushions, so I thought sod it, I’ll have a go myself. It came out so well I thought I’d share with you how to make a star cushion.

 

I recently found some cushions I love at Rocket St George but at £135.00 upwards for each one and I liked 3!! The three Sarah Bailey cushions I wanted totalled £465.00! A. I don’t happen to have that amount of spare cash hanging around. Last time I checked under the sofa I came up with two pence piece, a sock and the top off a wine bottle! And B. If I had the budget I’m not sure I could actually bring myself to spend that amount on 3 cushions. So here’s my version of how to make a star cushion and the other two designs as well.

 

Having had a good look at them I thought hang on a minute, they can’t be that difficult to make! Maybe I should have a go at making them myself. So that’s exactly what I did. They were actually fairly easy to make. And although not quite as good as the originals they only cost me around £40.00 for three rather than £400.00. You do need a sewing machine but I’ve designed these without zips to keep them as simple as possible.

 

What You Will Need

 

How to Make A Star Cushion - What you will need

 

2 metres of black velvet

1 metre gold imitation leather

Sewing Machine and thread in black and gold

Scissors

Ruler

Compass or string and drawing pin.

Pen

Paper to make your pattern

Kapock/stuffing

2 x 50cm x 50cm feather cushion pad

 

 

How to Make A Star Cushion

  • Start by making your template/ pattern for the cushion. I’m making my star 75cm wide. I followed a guide on how to create the pentagram shape online. At first I thought this was going to be difficult but as I followed each step one by one I realised that it was actually easy. This is where you need either a very large compass or like me you can use a piece of string attached to a pin at one end and you pen at the other. You basically create a circle with a diameter of 75 cm and then follow the instructions that can be found here. http://www.pagan-heart.co.uk/articles/drawingpentagram/drawingpentagram.html
  • Once you’ve drawn your template place it on the reverse of your imitation leather and draw around it with your pen. I found a Sharpie does the job really well. Then using your ruler draw another star around it approximately 1 cm bigger. Cut along the lines of this larger star with your scissors.

 

How To Make a Star Cushion

 

  • Place your gold star face down onto the top of your velvet (right sides together) and pin all the way around as close to the edge as possible.
  • Now using the sewing machine stitch all the way around the star following the line you drew for the smaller circle. Try to start half way down a point and finish leaving a whole large enough to just about get you hand in.
  • Now cut the points square across as close to your sewing line as possible and make a snip into each V where the points meet (again getting as close as possible to your stitching). This means the star will form a perfect shape when you turn it inside out.

 

How to make a star cushion

 

  • Bring one point at a time through the hole you have created and then using something like a wooden spoon push the points through so they are nice and pointy! Do not use something with a sharp end, I tried this initially and had to start again as I ripped the imitation leather. This is the fiddliest part and requires a bit of patience.
  • Now with the help of your wooden spoon use the Kapock to fill each point of your star working from the point back to the centre. Keep feeling each point to check you have evenly stuffed them. Add filling to the entire cushion and then sew the hole up my hand. So there you have it, how to make a star cushion!

 

How to make the square ‘no zip’ cushions

 

How To Make A Star Cushion

 

  • From your black velvet cut out two 52cm by 52cm squares.
  • Cut another two rectangles measuring 52cm by 29cm.
  • And another two measuring 52cm by 42cm.
  • On your paper draw a lightning bolt that measures 52cm long. The draw around this on the reverse of your imitation leather and cut out.
  • On another piece of paper follow the same directions as earlier to make a smaller star measuring 15cm in diameter. Then cut this out too. Draw around the finished star four times on the reverse of your imitation leather and then cut each one out.
  • Take one of your 52cm by 52 cm of black velvet and pin the lightning bolt right side up to the right side of your the square. You are going to be sewing as close to the edge as possible along your bolt so try to place the pins where the stitching line will eventually be.
  • Arrange and pin the stars on the other 52cm by 52cm square of velvet in the same way.
  • Change the thread on your machine to one as close as possible in colour to your gold leather. Then using straight stitch sew as close to the edge as possible around the stars and both long sides of the lightning bolt. These are your completed cushion fronts.
  • Take the other 4 remaining squares and place them side by side with the pile of the velvet running in the same direction top to bottom on all of them.
  • Fold the bottom edges of the two 52cm x 29cm squares by turning the square over and folding 1 cm along the length. Then turn again by 1cm and pin. You now have two squares measuring 52cm by 27cm. These are cushion backs number one.
  • Do the same with the two 52cm by 42cm cushions but this time fold the top edge to end up with a 52cm by 40cm cushion. These are cushion backs number two.
  • Sew along these hems to secure them after changing back to your black thread.

 

How to Make A Star Cushion

 

 

  • Place cushion back two right sides together at the top of cushion front. Pin and then use straight stitch to sew around the three outside edges 1 cm in from the edge.
  • Finally place cushion back number two right side down onto you almost completed cushion and pin and sew in the same way as step 13.
  • Before turning right side out snip off each corner diagonally with your scissors. Then turn the finished cushion right side out.
  • Voila, all you have to do now is pop in your cushion pads! And  then choose the perfect spot to display them.

 

How To Make A Star Cushion

 

There you have it! Three stylish cushion for £40 rather than £400. What do you think? I’d love you to leave a comment to let me know. And should you decide to have a go at making them please do take a pic and tag me on Instagram.

 

Rachel's Signature

 

 

You Might Also Like

2 Comments

  • Reply Kirstyisobel Fraser November 14, 2018 at 6:50 pm

    love the wreath and cushion tutorials – great ideas, and budget friendly 🙂

    • Reply Rachel Edmonds November 15, 2018 at 7:17 am

      Thank you so much, I’ve got lot’s more planned for the future x

    Leave a Reply